How to Adjust Birds and Clouds | Product Name “KUJIRA

The birds and clouds in this work are not glued in place, so they can be repositioned or the number of pieces can be changed.

The frame structure of this type of three-dimensional work looks like this.
*The illustrations and the cardboard for reinforcement are glued at the top. Also, the decoration of each piece is sandwiched between acrylic panels 1 and 2.

To change the position of the birds and clouds, first remove the back board,

Turn the whole thing over and remove the main frame.
*When turning over, do not hold the center of the illustration but hold the part overlapping the inner frame to avoid wrinkles.

Remove the top acrylic panel 1 as well, and change the position and number of birds and clouds while looking at the illustration.
*Five birds, white and black, are flying at the time of shipment.
*The Japanese paper included as a spare part can be easily torn off to make clouds, and multiple sheets can be stacked to create thicker clouds.

After adjustment, put the acrylic board 1 and the frame back, turn it over, set the illustration and the back board on the frame, and tighten the metal fittings. At this time, both the illustration and the last board with metal fittings should be placed in the exact center of the frame before fastening the metal fittings. If they are not aligned, some of the brackets may not close easily, and this can cause the birds and clouds to move.

*Please note that directly taking or moving birds or clouds with your fingers may cause fingerprints on the acrylic panel. I, Galan, use cotton swabs that have been slightly moistened (dry cotton swabs may cause the fibers to stick). (A dry cotton swab may cause the fibers to stick together.)

The corners of the acrylic board are sharp, so please be careful not to injure yourself.

That’s all, if you have any questions, please contact me anytime. You can email me or DM me on Instagram.